Ceramic Band Heaters offer a better and long life and use less wattage as it has insulation in plastics extrusion and injection molding applications. Most of these band heaters are designed with a stainless steel shroud enclosing high quality ceramic knuckles through which run coiled high temperature nickel-chromium element wire. You can find various configuration choices that allow selection of one or two piece heaters, type of closure, and type of leads/post terminals.
Benefits of Ceramic Knuckle Band Heaters:
Minimizing Operating Cost:
The presence of superior insulation causes less heat escapes to the air. Also, less wattage is required to maintain barrel temperature.
Operator Comfort:
With the majority of the heat going directly to your process, the ceramic band heater gives off significantly less heat to ambient air than a mica band heater.
Longer Heater Life:
It enjoys better life as the materials used are rated to operate at very high temperatures.
Flexible:
It is very flexible and easy to install and remove.
Subscribe to:
Post Comments (Atom)
It is good heater and really the good result
ReplyDeleteIt is good heater and really given the good result.
ReplyDelete